Bandit SG-40, Инструкция по эксплуатации и каталог запасных частей

Страница: 8 / 92

6 6/20
SAFETY PROCEDURES MODEL SG-40
INTRODUCTION
The purpose of this manual is to provide the user
with­specifications­and­procedures­for­the­­operation,­
maintenance and repair of this BANDIT product. As
with any piece of equipment, safety should always
be a constant thought while the machine is being
operated, serviced or stored. In order to highlight this
consideration, the material which addresses safety
is proceeded by the following signal words:
The equipment is designed and manufactured
in accordance with the latest product industry
standards. This alone does not prevent injury. It is
the operator’s responsibility to use good judgement
and follow the warnings and instructions as indicated
in this manual, on the machine and follow all safety
standards per ANSI and OSHA instructions.
Improper use of the product can result in severe
personal injury. Personnel using the equipment must
be­­qualified,­trained­and­familiar­with­the­operating­
procedures as defined in this manual, prior to
operating the product.
It is the responsibility of the owner or employer
to ensure that the operator is trained and practices
safe operation while using and servicing the
machine. It is also the owner’s responsibility to
provide and follow a regularly scheduled preventative
maintenance and repair program on the product,
using only factory approved replacement parts. Any
unapproved­repairs­or­­modifications­may­not­only­
damage the machine and its performance, but could
result in severe personal injury. Unapproved repairs
or­ modifications­ will­ void­ warranty­ and­ eliminate­
manufacturer of any liability claims. Consult the
equipment manufacturer with any questions.
The producer of this Bandit product reserves
the­right­to­make­any­­modifications­or­revisions­to­
the­design­or­specifications­of­its­machine­without­
advance notice. The producer also reserves the
right to change machine and part prices as needed
without advance notice.
DANGER indicates a hazardous situation which,
if not avoided, WILL result in death or serious injury
(contains white letters on red background).
WARNING indicates a hazardous situation which,
if not avoided, COULD result in death or serious
injury (contains black letters on orange background).
CAUTION indicates a hazardous situation which,
if not avoided, COULD result in minor or moderate
injury (contains black letters on yellow background).
NOTICE indicates information considered
important, but not hazard related (contains white
italic letters on blue background).
Each machine is shipped with a manual, a
customer’s check sheet on the product, and any
available parts & service manuals on component
parts not produced by this manufacturer. Additional
copies of these manuals and check sheets can be
purchased from the manufacturer, or through the
dealer. Engine parts, service and maintenance
manuals MUST be purchased through the engine
manufacturer or their dealer.
NOTICE
NOTICE
DANGER
CAUTION
WARNING
WARNING
WARNING
SAFETY INSTRUCTIONS indicate general
instructions relative to safe work practices and
reminders of proper safety procedures (contains
white italic letters on green background).
SAFETY INSTRUCTIONS