BA230
27
UK
PROGRAMMING PROCEDURE AND SYSTEM CONFIGURATION
The system adjustments can be accessed via the display. There are 5 different menus marked with the letters A,
C, F , H and E.
1
2
33
4
5
To enter the programming procedure, start from the display as
shown in the picture and press simultaneously the keys ESC and
OK for 3 s (The writing Gbd will turn off)
Go to step 2.
The writing P A S S appears on the display.
Press the OK key to go to step 3.
Pressing simultaneously the keys + and - for 3 s, all default settings
will be loaded (only the performed cycles settings remain stored).
Press the ESC key to go back to step 1.
4 figures appear on the display ( 0 0 0 0 ), the first one is flashing.
With the + or – keys, the user selects the first digit of the installer
code.
When the required digit is selected, presso OK to confirm and go to
step 4.
The second figure is flashing.
With the + or – keys, the user selects the second digit of the installer
code.
When the required digit is selected, press OK to confirm and go to
step 5.
The third digit is flashing.
With the + or – keys, the user selects the third digit of the installer
code.
When the required digit is selected, press OK to confirm and go to
step 6.
ESC
OK
Gbd
-
+
ESC
OK
PASS
-
+
ESC
OK
0
0 0 0
-
+
ESC
OK
4
0
0 0
-
+
ESC
OK
4 6
0
0
-
+
