BA230
31
UK
Description
Menu
Function
Status
It configures the system for swing gate, overhead door or barrier.
The activation of this menu automatically disables A3.
SWING /
OVERHEAD DOOR / BARRIER
A2
Y
It configures the system for a sliding gate.
This configuration automatically excludes:
gate phase shifts in opening and closing
hammer stroke
2 s opening and closing final stroke
T3 additional time
NOTE: the limit switches are NOT activated automatically, choose the
required configuration with menu C5
The activation of this menu automatically disables A2.
SLIDING GATE
A3
Y
It configures the system for 1 motor.
In the menu C11 it will be possible to set the courtesy light output:
N = courtesy light disabled
Y1 = courtesy light on MOTOR 2 output (diagram output 230 Vac)
(3)
Y2 = courtesy light on ELECTRIC LOCK 2 output (see diagram 12 Vdc
output)
The courtesy light output is 3-minutes timed.
The activation of this menu automatically disables A5.
1 MOTOR CONFIGURATION
A4
Y
MENU A: SYSTEM CONFIGURATION AND OPERATING LOGIC SELECTION
E3 = SAFETY DEVICE (EDGE)
Press OK in sequence to:
Enable the input (the Y will appear next to E3)
Disable the input (the N will appear next to E3)
Use the + and – keys to enter the following or the previous menu.
Press ESC to leave the menu; “ACFHE” is now shown on the display.
Press ESC to store the settings and leave the programming phase,
accessing normal operation.
The starting symbols reappear on the LCD.
At this point, the +, - and OK keys mean:
+
-
OK
23
24
25
ESC
OK
E 3
Y
-
+
ESC
OK
A C F H E
-
+
ESC
OK
Gbd
-
+
START
PEDONALE
STOP
KEY + enters the following menu A1-A2-A3-…
KEY – enters the previous menu A3-A2-A1…
KEY ESC leaves the menu
KEY OK enables Y (yes). It enables the function and automatically disables the complementary function
(example; the activation of A4 = 1 motor automatically disables A5 = 2 motors)
