Documentation for SONOREX CNp 28-2
BANDELIN electronic GmbH & Co. KG, Heinrichstraße 3-4, 12207 Berlin, Germany Page 29 from 55
6.2
Fill bath
Before starting the cleaning process, fill the bath up to the upper filling level mark with approx.
28 litres of cleaning medium (Fig. 6). Depending on the application of the solution in the cleaning
bath (left), add a suitable cleaning preparation in a suitable dosage. Fill the rinsing bath (right) with
tap water or deionised water.
When the fill level is sufficient (see fill level sensor Fig. 7), the heating is automatically activated by
the control unit, provided the heating selection is active for the respective bath (Fig. 8).
Figure 6: Fill level markings
Only use cleaning and disinfection preparations that have been approved by the manufacturer
for use in the CNp cleaning system. Do not expose the unit to corrosive influences. Do not
operate the unit without liquid.
Do not use chemicals that contain chloride ions.
No guarantee is given for damage to the appliance caused by the use of unsuitable disinfectants
or cleaning agents.
CAUTION
Suction opening
Maximum fill level
Minimum fill level
