Original - Operating Instructions SONOREX CNp 28-2
BANDELIN electronic GmbH & Co KG, Heinrichstraße 3-4, 12207 Berlin, Germany Page 24 from 55
5
Installation
5.1
Unpacking the unit or components
Remove all packaging materials from the unit or components.
Suitable tools for removing the packaging materials.
-
Remove all packaging materials.
-
Note: Do not damage the unit or components when removing the packing materials.
-
Dispose of all packaging materials in accordance with local disposal
regulations and applicable environmental protection laws.
5.2
Operating conditions
The unit is only intended for use in Europe under normal ambient conditions in 2-shift operation.
For permissible ambient temperature and humidity, see Technical Data (chapter 3.5).
The inside of the unit must be cooled by air exchange.
Keep the exhaust and supply air openings at a minimum distance of 10 cm from other objects.
5.2.1
Installation site
The surface must be firm, stable and sufficiently load-bearing. It is not necessary to fasten the unit.
5.2.2
Align unit
-
Align the unit so that all minimum distances to other objects are maintained. In particular, the
supply air and exhaust air openings must not be obstructed. (Fig. 2 and Fig. 3)
-
Activate the two parking brakes on the rolling feet.
CAUTION
