51346-007 GB/2020-08
17 / 46
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.1.2 Explanation of the display
fi
elds
All relevant operating parameters and the status are shown on the LC display (e.g.: stand-
by mode).
12:00:00 17.0°C 50%
12:00:00
17.2°C
12:00:00
Runtime
Current (remaining) runtime for the ultra-
sound operation.
If [START/STOP] has not yet been pressed,
the time will correspond to the target runt-
ime.
Actual temperature
Actual temperature in the oscillating tank
Power speci
fi
cation
Speci
fi
ed value for the ultrasonic power during
sonication (in %)
Target tempera-
ture
Speci
fi
ed value for
the temperature in
the oscillating tank
(in °C)
Target runtime
Speci
fi
ed value for the duration
of the ultrasound operation (in
hh:mm:ss format)
Note:
As soon as the ultrasonic bath is turned on, the cooling will run automatically according to
the set target temperature. If cooling is not desired, it can be temporarily deactivated by
adjusting the target temperature, e.g. by setting the temperature to 30 °C.
The ultrasound is switched on separately (see chapter 3.4).
3.2
Signals on the ultrasonic bath
Meaning of the colours of the status LED
LED Explanation
green
Ultrasonic bath is operating faultlessly.
yellow
Warning. Ultrasonic bath may still be operated, however.
red
Error (see error number). The ultrasonic bath or ultrasound cannot be started.
Newly-occurring errors are noti
fi
ed with a short audible signal and sometimes with a
blinking warning sign
.