18 / 46
51346-007 GB/2020-08
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
3.3
Types of operation
The operation of the SONOCOOL ultrasonic bath is conducted using four di
ff
erent
operating modes.
Name and sample display
Brief description / display
To achieve...
Stand-by mode
Basic state of the ultrasonic bath
The runtime (shown inversely)
and the current temperature are
displayed in the upper portion
of the display. In the bottom
rows, the target values for the
time, temperature and power are
displayed.
The cooling is activated, the
ultrasound is turned o
ff
.
- After turning on
+ initialisation
- When the runtime
has elapsed
- When interrupting
a process from the
Pause mode
+ pressing and
holding the [SET]
key for a long time
Editing mode
Menu to change the operating
parameters (see chapter 3.4
).
The selected parameter and the
current value are shown on the
top portion of the display. All valid
target values are shown on the
bottom rows.
- Stand-by mode
+ [SET] key
- Active mode
+ [SET] key
- Pause mode
+ [SET] key
Active mode
The ultrasound is activated.
The residual runtime ( remaining
runtime) is shown in non-inverted
format and runs as a second-by-
second countdown. Below it, the
actual temperature is displayed.
All valid target values are shown on
the bottom rows.
- Stand-by mode +
[START/STOP] key
- Editing mode (from
Stand-by and Pause)
+ [START/STOP] key
- Pause mode +
[START/STOP] key
Pause mode
Interruption of the active mode
The remaining runtime is shown in
inverted form (dark text on a light
background). The process can be
continued thereafter.
The display is similar to the one
for Stand-by mode; however the
message "p-a-u-s-e" appears
on the next to last row.
- Active mode
+ [START/STOP] key
12:00:00 17.0°C 50%
Temperature:
17.2°C
17
12:00:00 17.0°C 50%
12:00:00
17.2°C
12:00:00
12:00:00 17.0°C 50%
11:59:57
17.2°C
12:00:00 17.0°C 50%
===== p-a-u-s-e =====
12:00:00
17.2°C
09:15:21