168
Manual Documentation Number: EIRM-EXTEND-8-1
m
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
vlan1.1 means vlan 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2.
Usage:
Use
ip igmp snooping mrouter interface
command to statically configure
the specified VLAN constituent interface as a multicast router interface for
IGMP Snooping in that VLAN.
Use the
no ip igmp snooping mrouter interface
command to remove the
static configuration of the interface as a multicast router interface.
3.
Command Syntax:
(no) ip igmp snooping mrouter interface IFNAME
IFNAME Specify the name of the interface
4.
Example:
The following example shows interface fe1 (port 1) statically configured to
be a multicast router interface on
vlan1.1
:
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip igmp snooping mrouter interface fe1
switch_a(config-if)#
IGMP passive snooping:
Report suppression:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2.
Usage:
Use
ip igmp snooping report-suppression
command to enable report
suppression for IGMP versions 1 and 2.
Use the
no ip igmp snooping report-suppression
command to disable
report suppression.
3.
Command Syntax:
(no) ip igmp snooping report-suppression