Manual Documentation Number: EIRM-EXTEND-8-1
m
95
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
4.
Example:
The following example sets the new password
mypasswd
to Ethernet
Extender Switch:
switch_a(config)#enable password mypasswd
switch_a(config)#
IP Address
IP Address/IP Subnet Mask:
1.
Command Mode: Interface mode
Logon to Configure Mode (Configure Terminal Mode).
Then logon to Interface mode.
vlan1.1 means vlan 1.
The
switch_a(config-if)#
prompt will show on the screen.
switch_a(config)#interface vlan1.1
switch_a(config-if)#
2.
Usage:
Use
ip address
command to set the IP address of an interface.
Use the
no ip address
command to remove the IP address from an
interface.
3.
Command Syntax:
ip address IP-ADDRESS
no ip ad=-ress IP-ADDRESS
no ip address
IP-ADDRESS A.B.C.D/M specifies the IP address and prefix length of an
interface.
M specifies IP subnet mask, 8: 255.0.0.0, 16:255.255.0.0, 24:
255.255.255.0.
4.
Example:
The following example sets the new IP address
192.168.1.10
and new IP
subnet mask
255.255.255.0
to Ethernet Extender Switch:
switch_a(config)#interface vlan1.1
switch_a(config-if)#ip address 192.168.1.10/24
switch_a(config-if)#
Default Gateway:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.