Manual Documentation Number: EIRM-EXTEND-8-1
m
143
B&B Electronics Mfg Co Inc – 707 Dayton Rd - PO Box 1040 - Ottawa IL 61350 - Ph 815-433-5100 - Fax 815-433-5104 – www.bb-elec.com
B&B Electronics – Westlink Commercial Park – Oranmore, Galway, Ireland – Ph +353 91-792444 – Fax +353 91-792445 – www.bb-europe.com
SNMP
SNMP General Setting, SNMP v1/v2c, SNMP v3
SNMP General Setting
SNMP Status:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use
snmp-server enable
command to enable and
no snmp-server enable
command to disable SNMP to the Ethernet Extender Switch.
3.
Command Syntax:
(no) snmp-server enable
4.
Example:
The following example enables SNMP to the Ethernet Extender Switch:
switch_a(config)#snmp-server enable
switch_a(config)#
Description:
1.
Command Mode: Configure mode
Logon to Configure Mode (Configure Terminal Mode).
The
switch_a(config)#
prompt will show on the screen.
switch_a(config)#
2.
Usage:
Use
snmp-server description
command to specify and
no snmp-server
description
command to remove description for SNMP.
3.
Command Syntax:
snmp-server description DESCRIPTION
no snmp-server description
DESCRIPTION The description for SNMP.
4.
Example:
The following example specifies description (
description
) for SNMP:
switch_a(config)#snmp-server description description
switch_a(config)#