baltur TBG 45 PN-V, Инструкция по эксплуатации

Страница: 16 / 126

14 / 24
0006081484_201104
EN
GL
IS
H
FAULT CODE DESCRIPTION POSSIBLE CAUSES
N.4 green leds on,
red led N.1 on
The internal temperature of the microcontroller
has reached unacceptable values
The burner is installed in an environment with temperature
conditions that are outside the envisaged limits for proper
operation (At<-10°C or At>40°C).
N.4 green leds on,
red led N.2 on
The temperature measured by the dissipator
on the NTC sensor has reached unacceptable
values. The fault status does not remain when the
motorinverter is reset and restarts automatically
- Unacceptable ambient temperature
- Insufficient thermal exchange by the dissipator (Check that
the space between the dissipator fins is not obstructed
by dust or dirt)
N.4 green leds on,
red led N.3 on
The burner power supply voltage has reached
unacceptable values.
Power surges in the electrical supply line. Check that the
line is within the values (V=230 -10% +15%)
N.4 green leds on,
red led N.4 on
The internal power supply of the motorinverter
has fallen below unacceptable values
Inverter board fault. Contact assistance centre
N.4 green leds on,
red led N.5 on
The electric current in the motor has exceeded
the safety threshold.
The electric motor has absorbed an higher amount of
current than the amount on its information plate, due to an
overload for example.
N.4 green leds on,
red led N.6 on
The electric current in the motor has exceeded
the safety threshold. Hardware protection much
faster than the previous act of safeguarding the
motorinverter itself.
The electric motor has absorbed an higher amount of cur-
rent than the amount on its information plate, due to the
seizure of a bearing for example.
N.4 green leds on,
red led N.7 on
Internal EEPROM memory fault Inverter board fault. Contact assistance centre
TABLE 1
Table indicating the set frequencies
Number of red lights on Output frequency scale [Hz]
1 18 - 22
2 22 - 26
3 26 - 30
4 30 - 34
5 34 - 38
6 38 - 42
7 42 - 46
8 46 - 50
TABLE 2
Inverter fault code table