Balluff BVS ID-M1280-F1 Series, Руководство по настройке

Страница: 333 / 342

BVS ID-M1280xF1-xx-xxx
english 159
•
•
•
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
LED Standard
Selection 0x00
FD
(253) 0 R/
W 1
byte UINT8(E
NUM) Yes 0
LED Standard Selection
It is possible to select between two different signaling standards with the help of a parameter. The parameter
defines which signaling standard is to be used:
Value Standard
0 BALLUFF
1 NAMUR
The parameter is reset by Application Reset and Factory Reset.
Process Data Info and Configuration
Description
Process data information and configuration offers various possibilities related to process data:
Selection of a process dataset specified by the BVS ID
Information about the structure of the input and output data
Information about the last valid value for input and output data
As a diagnosis function, monitoring of the updates of certain process values is available. If these are not
updated in the specified time, the
BVS ID sends corresponding diagnosis messages.
Invalid Process Data
Input data (from the device to the master) is only marked as invalid if the BVS ID has the Failure device status.
Invalid output data (from the master to the device) is not processed by the BVS ID . The BVS ID then operates
only with the next valid data. Running commands will be possibly aborted.
ISDU
Name Inde
x Subin
dex Acc
ess Leng
ht Data
Type Data
Storag
e Default
Process Data
Input Descriptor 0x00
0E
(14) 0 R 96
byte
s UINT8[ ] n/a
In the case of individual pieces of faulty data, the data is not marked as invalid but is instead replaced
by substitution values or error codes. This is to be taken into account during the evaluation.
NOTE
