Balluff BVS ID-M1280-F1 Series, Руководство по настройке

Страница: 194 / 342

BVS ID-M1280xF1-xx-xxx
20 english
2.3.2 Configure
You can use Configure to create inspection programs.
Menu item Meaning
The program takes images continuously and runs through to the selected program step
("
Loop "). If a trigger mode has been selected in " Inputs ", it is waiting for a trigger event.
Emits a trigger if the Loop is activated and a trigger event is waited for. This causes an image
to be acquired.
Performs a single iteration if the Loop is not activated. This also causes an image acquisition.
Auto Setup With this button you can start the Auto Setup process .
Tools An inspection consists of 3 elements: Inputs , Analysis , and Outputs . These tools are
described in the following chapter.
With the save button you can save the current state of the inspection.
Saving inspection programs
Modifications to the inspection program are not automatically saved. Instead, the save symbol is highlighted in
color in the configuration mode to indicate that there are unsaved changes. When the save symbol is pressed,
all changes will be written and remain even after power loss.
2.4 Tools
2.4.1 Inputs
Inputs consists of following sections:
Changes to the system settings (camera settings, network settings or similar) are always saved
immediately and do not have to be saved manually.
NOTE
