Balluff BVS ID-M1280-F1 Series, Руководство по настройке

Страница: 313 / 342

BVS ID-M1280xF1-xx-xxx
english 139
Threshold Vibration
Threshold value for the detection of excessive vibrations.
Upper Threshold Temperature
Threshold value for the detection of excessive temperature.
Lower Threshold Temperature
Threshold value for the detection of temperature that is too low.
State
The current status can be read under State.
Bit Name Description
0 Vibration The vibrations are above the threshold value.
1 Upper Temperature The temperature are above the threshold value.
2 Lower Temperature The temperature are below the threshold value.
3 Internal Humidity The humidity is too high.
Time
Under Time, the summed time in seconds in which the BVS ID was exposed to an extreme condition can be
read out.
System Commands
Command Value Device Action
0x81 (129) Application Reset – Resets writable parameters to the default value.
0x82 (130) Reset Factory Settings – Resets writable parameters to the default value.
0xA5 (165) Maintenance Reset – Resets the value for Time and Flags.
Events
Event
Code Event Type Event – Description – Remedy Device Status
0x8D13
(36115) Warning One or more extreme conditions present. 0 – Device is operating
properly.
Variant Dependence
The functionality is available in all variants.
For the internal humidity, it is not possible to parameterize your own limit values.
NOTE
