background image

www.balluff.com

1

english

BTL  B/ZNC_ 00- _ _ _ _ -C15A _ _ _0-000S35

Magnetostrictive Linear Position Sensor – Rod Style

954925_AA ∙ DE ∙ E22; Änderungen vorbehalten.

The CE Mark verifies  

that our products meet the requirements 

of the current EU Directive.

Ø 

10.2 

 25 

0.5 Ø 25 

 34 

60

X

 41 

 Ø 45 

12

M16

Thread size:

BTL B…: M18×1.5

BTL Z…: 3/4“-16UNF

Magnet

2)

Measuring length

Null point

End point

Mounting surface

Rod end

Type

X

Rod end

BTL _NC

A

30 −1 mm

with thread M4/4.5 deep

BTL _NC

E

2" −0.04"

with thread M4/4.5 deep

1) Unusable area

2) Not included in scope of delivery

1)

1)

S35

About this guide

This guide provides all the information required for the 

installation and connection of the BTL magnetostrictive 

linear position sensor with analog current and voltage 

interface.
It applies to the following models:
– 

BTL  BNC_ 00- _ _ _ _ -C15A _ _ _0-000S35

 

BTL  ZNC_ 00- _ _ _ _ -C15A _ _ _0-000S35

Intended use

The BTL magnetostrictive linear position sensor, together 

with a machine controller (e.g. PLC), comprises a position 

measuring system. It is intended to be installed into a 

machine or system and used in the industrial sector. 
Proper function according to the specifications in the 

technical data is only assured when the product is used 

solely as described in the user’s guide and the respective 

documents as well as in compliance with the technical 

specifications and requirements and only with suitable 

original Balluff accessories.
Otherwise, there is deemed to be unintended use. 

Unintended use is not permitted and will result in the loss 

of warranty and liability claims against the manufacturer.

Reasonably foreseeable misuse

The product is not intended for the following applications 

and areas and may not be used there:
–  In safety-oriented applications in which personal safety 

depends on the device function

–  In explosive atmospheres

 

– In food applications

Other applicable documents

A comprehensive user’s guide and additional information 

about this product can be found at 

www.balluff.com

 on 

the product page.

Safety notes

Activities such as 

installation

connection

 and 

commissioning

 may only be carried out by qualified 

personnel.

Qualified personnel

 are persons whose technical 

training, knowledge and experience as well as knowledge 

of the relevant regulations allow them to assess the work 

assigned to them, recognize possible hazards and take 

appropriate safety measures.
The 

operator

 is responsible for ensuring that local safety 

regulations are observed.

In particular, the operator must take steps to ensure that a 

defect in the product will not result in hazards to persons 

or equipment.
The product must not be opened, modified or changed. If 

defects and unresolvable faults occur in the product, take 

it out of service and secure against unauthorized use.

Dimensions and function

To determine the position of a plant component, a magnet 

is connected to the component. Together they are moved 

along a waveguide located inside the BTL.

Содержание BTL BNC 00 C15A Series

































Отзывы: