14
english
4
Installation and connection (continued)
Installing sensor head for arc-shaped applications
(rotary motion < 360°)
For rotary movements the use of the installation
aid BAM TO-ML-018-01 is strongly
recommended.
Fig. 4-8:
1
6
7a
7b
4
3
2
5
5
Installing sensor head on shaft
For arc-shaped applications the motion range is < 360°
(arc-shaped measuring range).
1.
Attach installation aid BAM TO-ML-018-01 (
1
) and
sensor head (
2
) to the machine using the screw (
3
).
2.
Loosely attach sensor head directly to the machine (
4
).
3.
Place spacer film (
5
) between sensor and installation
aid.
4.
Position installation aid so that the sensor head is flush
at the rear with the line on the installation aid (
6
).
5.
Align installation aid symmetrical to the shaft (
7a
,
7b
).
6.
Place sensor head against installation aid and shaft
and fasten using screw (
3
).
7.
Fasten sensor head using screw (4).
8.
Check whether installation aid is symmetrical with the
shaft (
7a
,
7b
) and sensor head is flush with the line in
back (
6
).
9.
Remove distance gauge (
5
).
10.
Loosen screw (
3
) and remove installation aid in the axis
direction.
11.
Use screw (
3
) to attach sensor head to the machine.
12.
Secure the screws against unintended loosening (e.g.
with locking paint).
Installing sensor head for ring applications
(rotation motion ≥ 360°)
For rotary movements the use of the installation
aid BAM TO-ML-018-01 is strongly
recommended.
Fig. 4-9:
1
6
8a
7
8b
4
3
2
5
5
Installing sensor head on ring
For ring applications the movement range of the ring is
≥ 360°.
Example: Ring BML-M38-A50-A0-M243/210-E
Other rings available on request.
1.
Install ring and if needed adjust so that it is centered.
The distance to the sensor may change by max.
±0.1 mm.
2.
Attach installation aid BAM TO-ML-018-01 (
1
) and
sensor head (
2
) loosely to the front of the machine
using the screw (
3
).
3.
Loosely attach sensor head directly to the rear of the
machine (
4
).
4.
Place spacer film (
5
) between sensor head and
installation aid.
5.
Align installation aid symmetrical with the ring (
7
) (
8a
,
8b
).
6.
Position installation aid so that the sensor head is flush
at the rear with the edge (
6
) of the installation aid (red
line).
7.
Press BML lightly against the ring and fasten using the
front screw (
3
).
8.
Attach sensor head using rear screw (
4
).
9.
Check whether installation aid is symmetrical with the
shaft (
8a
,
8b
) and sensor head with the edge in
back (
6
).
10.
Remove spacer film (
5
) from between sensor and
installation aid.
11.
Loosen front screw (
3
) on sensor head.
12.
Remove installation aid (
1
).
13.
Tighten front screw (
3
) on sensor head.
14.
Secure the screws against unintended loosening (e.g.
with locking paint).
BML-S1G0-_7_ _-M5E_-_0-_ _
Absolute magnetic encoder system
Содержание BML-S1G0 7 M5E 0 Series
