Balluff BIS C-60 3 Series, Руководство пользователя

Страница: 93 / 100

85
85
english
Wiring diagram
for BIS C-6003
processors with
BIS C-655 adapter
(2 × 2 Heads)
BIS C-6003
Interface Information / Wiring Diagrams
Connection for Read/Write Head 1.1/1.2
Connection for Read/Write
Head 2.1/2.2
Pin Function
1 +Vs
2 –IN
3 –Vs
4 +IN
5
Pin Function
1 Drain
2 V+
3 V–
4 CAN_H
5 CAN_L
Pin Function
1 Drain
2 V+
3 V–
4 CAN_H
5 CAN_L
X1 , supply voltage,
digital input
X2 , DeviceNet input (male)
X3 , DeviceNet output (female)
The ground connector should be connected to earth directly or
through a RC combination depending on the system (potential
counterpoise).
When connecting the bus leads, make sure that the shield has pro-
per connection to connector housing.
☞
86
english 86
S1
1
2
3
4
5
6
7
8
OFF ON
S2
1
2
ON OFF
Head 1
Head 2
Head
X4
RS 232
X1 X2 X3
Changing the
EEPROM in the
BIS C-6003
processor
Location of the
EEPROM
BIS C-6003
Changing the EEPROM
To replace the EEPROM, open up the processor as described on 81.
Be sure before opening that the unit is discon-
nected from power.
To avoid damaging the EEPROM, please ob-
serve the requirements for handling electrostati-
cally sensitive components.
The EEPROM is replaced by unplugging and
plugging back into the socket.
supply voltage,
digital input DeviceNet
input DeviceNet
output
Function
ground FE
C60_3-025_825645_1 31 0_e.p65