Baldor MDH1A05TB-RC23, Руководство по установке

Страница: 146 / 166

www.baldormotion.com
C-16 Mint Keyword Summary MN1901
Keyword Description
PHASESEARCHCURRENT To select amount of current applied to the motor during
the phase search sequence.
PHASESEARCHMODE
To turn on the ‘debounce’ controller used during the
initial alignment stage of the phase search sequence.
PHASESEARCHSPEED To select the speed of travel during the search sections
of a phase search sequence.
PHASESEARCHSTATUS
To determine whether commutation is aligned on an
axis.
PHASESEARCHTRAVEL To select the amount of travel during the search sections
of a phase search sequence.
PLATFORM
To return the platform type.
PLCACTION
To read the action assigned to a PLC Task channel.
PLCACTIONPARAMETER
To read the associated parameter for an action assigned
to a PLC Task channel..
PLCAUTOENABLE To specify whether the PLC Task will be automatically
enabled on power-up.
PLCCONDITION
To read a PLC test condition.
PLCDEFAULT
To reset the PLC Task table to default settings
PLCENABLE
To enable/disable the PLC Task.
PLCENABLEACTION
To enable/disable individual PLC Task channels.
PLCGEARFACTOR To set or read the gear factor used by the ‘Fast Gear’
PLC Action.
PLCOPERATOR
To read the operator for a PLC Task channel.
PLCPARAMETER
To read the associated parameter used by a PLC Task
channel’s condition.
PLCSTATUS
To read a bit pattern of active (true) PLC Task channels.
PLCTASK
To set up PLC Task channels.
PLCTIME
To set or read the frequency of a PLC Task.
POS
To set or read the current axis position.
POSACHIEVED
To indicate whether the axis is ‘in position’.
POSDEMAND
To set or read the instantaneous position demand.
POSREMAINING
To indicate the remaining move distance.
POSROLLOVER To count the number of wraps of the axis position value.