![background image](http://html1.mh-extra.com/html/balboa/tp200-panel/tp200-panel_user-manual_468577003.webp)
TP200
USER GUIDE
42369 Rev A2
2
1
Balboa Water Group | Your Single Source Solution
RED LCD CHARACTERS
Red indicates flashing or changing characters. For example, these
segments flash when you press the TEMP button to change the Set
Temperature.
BLUE LCD CHARACTERS
Blue indicates an alternating message or a progressive message.
When you view Time-of-Day, this progressive message appears.
TEMPERATURE BUTTON
The TEMP button icon indicates an “action.” For example, pressing
the TEMP button initiates any one of the following actions: adjusting
the Set Temperature, menu navigation, setting the Filter Cycle Time,
setting the Heat Mode, etc.
LIGHT BUTTON
The LIGHT button icon indicates navigation or a selection.
HOLLOW DOTS
Hollow dots indicate that your last setting was not saved. For
example, when you set a feature such as Time-of-Day, you need to
press the LIGHT button to save your setting. If you do not press the
LIGHT button, the Main Screen will appear automatically after a few
moments, and your last setting will not be saved.
SOLID DOTS
Solid dots indicate that your last setting will be saved. For example, if
you change the Set Temperature and pause a few moments, the Main
Screen will appear automatically, and your setting will be saved. The
same applies to other features that will be discussed later.
DASHED LINE AROUND THE DISPLAY
Dashed lines indicate a Menu item that depends on a manufacturer
configuration and may or may not appear.
TABLE OF CONTENTS
SEQUENCE KEY
02
SEQUENCE
KEY
03
PANEL INTERFACE & TERMINOLOGY
04
MAIN MENUS & NAVIGATION
05
SET TIME-OF-DAY
06
CHANGE SET TEMPERATURE
07
SET FILTER CYCLE TIMES
09
RESTRICT OPERATIONS
13
INVERT DISPLAY
14
HOLD MODE (STANDBY)
16
LIGHT TIMER PROGRAMMING
17
SPA BEHAVIOR
19
HEAT SETTINGS
23
FILL IT UP!
25
PANEL MESSAGES
27
GENERAL
29
HEATER RELATED
31
TEMPERATURE SENSOR RELATED
33
MISCELLANEOUS
34
CONTROL SYSTEM RELATED
36
REMINDER
39
PREFERENCES
42
DISPLAY F° OR C°
43
TURN ON/OFF REMINDERS DISPLAY
44
SET 12 OR 24 HOUR CLOCK
45
SET CLEANUP CYCLE DURATION
46
TURN ON/OFF M8
47
UTILITIES
50
INFORMATION SUBMENU
51
GFCI TEST FEATURE
55
FAULT LOG
57
TEMPERATURE SENSOR READINGS