manualshive.com logo in svg

Balboa TP200 PANEL, Руководство пользователя

Поделиться
Скачать
Balboa TP200 PANEL Скачать руководство пользователя страница 25

Flashing characters

Progressive message

Press TEMP button for “action”

Press LIGHT button to “select”

Pause / back to Main Screen / setting not saved

Pause / back to Main Screen / setting saved

           Menu Items may or may not appear

SEQUENCE KEY  

( View page 2 for full description )

TP200 

USER GUIDE   

     

42369 Rev A2

46

45

Balboa Water Group   |   Your Single Source Solution

PREFERENCES

SET CLEANUP  
CYCLE DURATION

Press the TEMP button. The Set 
Temperature will appear and flash.

While the Set Temperature is flashing,  
press LIGHT until PREF appears. 

Press TEMP until F/C appears.

Press LIGHT until the following  
message appears.

This indicates that you are about to  
view the current duration setting.

Press TEMP to view the current duration.

In this example the current duration is 
2.5 hours. If you press LIGHT, the Main 
Screen will appear automatically, and 
the duration will remain 2.5 hours.

If you want to change the duration,  
press the TEMP button. 

In this example the duration will be 
changed to 3.0 hours.

Press LIGHT to save your setting, and 
PREF will appear.

Press LIGHT to view UTIL. Or, pause a 
moment and the Main Screen  
will appear.

Follow this sequence to 
view the current Cleanup 
Cycle duration or change  
the duration.

The duration can be set from 0 - 4 
hours in 30 minute increments. 

The heater pump will run during a 
Cleanup Cycle. View page 18 for 
more information on the  
heater pump.

Cleanup Cycle is not available on  
all control systems. 

SEQUENCE

Main Screen

Follow this sequence to view the 
current M8 setting and to change  
the setting. 

M8 is artificial intelligence software 
contained in your spa’s control system. 
M8 looks for opportunities to decrease 
device usage by evaluating water 
temperature readings. Stable water 
temperatures equal less device usage 
and less wear and tear.

M8 is not available on all  
control systems. 

Press the TEMP button. The Set 
Temperature will appear and flash.

While the Set Temperature is flashing,  
press LIGHT until PREF appears. 

Press TEMP until F/C appears.

Press LIGHT until M8 appears.

Press TEMP to view the current setting.

In this example the current setting is OFF. 
If you pause a moment, the Main Screen 
will appear automatically, and the setting 
will remain OFF.

Press TEMP to switch the setting from 
OFF to ON.

Press LIGHT to save your setting, and 
PREF will appear. 

Press LIGHT to view UTIL. Or, pause a 
moment and the Main Screen will appear.

SEQUENCE

Main Screen

PREFERENCES

TURN ON/OFF M8

Содержание TP200 PANEL


































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды