![background image](http://html1.mh-extra.com/html/balboa/tp200-panel/tp200-panel_user-manual_468577010.webp)
Flashing characters
Progressive message
Press TEMP button for “action”
Press LIGHT button to “select”
Pause / back to Main Screen / setting not saved
Pause / back to Main Screen / setting saved
Menu Items may or may not appear
SEQUENCE KEY
( View page 2 for full description )
or
or
TP200
USER GUIDE
42369 Rev A2
16
15
Balboa Water Group | Your Single Source Solution
HOLD MODE +
DRAIN MODE
DRAIN MODE
Some control systems have Drain
Mode, which is a component of Hold
Mode. Drain Mode allows a pump to
be employed when draining the water.
Follow this sequence to use Hold
Mode + Drain Mode.
Light Timer Option
If LITE TIMR does not appear
in the Main Menu, the Light
Timer feature is not enabled by
the manufacturer of your spa.
In this example, we will do
the following:
• Turn On the Light Timer
• Set the start time to 8:00 AM
• Set the duration to 3 hours
This means the Light Timer
will end at 11:00 AM. Follow
the same sequence to set the
Light Timer on your spa.
When available, the Light
Timer is OFF by default.
LIGHT TIMER
PROGRAMMING
Press the TEMP button.
The Set Temperature will
appear and flash.
While the Temperature
is flashing, press LIGHT
until LITE TIMR appears.
This means Light Timer
is Off.
This means Light Timer
is On.
This means you are about
to set the start time of the
Light Timer.
Press TEMP to view the
start time.
Press TEMP change the
Hour from 7 to 8.
Press LIGHT to select
the minutes.
Press TEMP to change
the minutes from 45 to 00.
Press LIGHT to save your
setting, and RUN HRS
will appear. This message
means you are about to
set the duration.
Use the same sequence
to set the duration.
This message means the Light
Timer will end at 11:00 AM.
Press LIGHT to go back to the
Main Screen, or wait a few
moments and the Main Screen
will appear automatically.
SEQUENCE
Main Screen
Press the TEMP button. The Set
Temperature will appear and flash.
Press the LIGHT button until
HOLD appears.
Press the TEMP button to put the
pumps on Hold for one hour.
This message indicates that the
pumps are on Hold, and this
message will appear during the
whole hour.
You can exit Hold Mode at any time
by pressing the LIGHT or TEMP
buttons.
If your control system has Drain
Mode, press the JETS button to
activate it.
This message indicates that Drain
Mode is running for one hour, and
this message will appear during the
whole hour.
You can end Drain Mode and return
to Hold Mode by pressing the
JETS button.
You can exit Hold Mode + Drain
Mode at any time by pressing the
LIGHT or TEMP buttons.
This indicates that
Hold Mode + Drain Mode is done.
After a moment the Main Screen will
appear automatically.
Main Screen
SEQUENCE