COMBINATION OVEN OPERATION MANUAL
30
Enter the regeneration time (A) or the core temperature
(B) and press the START BUTTON (C). The oven will
pre-heat automatically (empty) and then notify when
to place the items in the oven via a sound signal and
display on the screen.
REGENERATION PROGRAMS
Saving a new program
Personal programs can be added to the programs
already present.
To create a new program, select Manual program
from the list of regeneration programs and set the
regeneration time (or the temperature of the core probe)
and activate one of the SOFT or CRISPY functions if
necessary.
Once the desired parameters have been set, press the
functions button and save the program in the oven
memory as explained on page 21 of this instruction
manual.
Modifying a program
If a program that is already saved is to be modified,
select it from the programs list of the regeneration
menu.
Make the modifications desired.
Use the START BUTTON to start the program or to save
the modifications by pressing the FUNCTION BUTTON
(D) and then the SAVE BUTTON.
Rename/Delete a program
Like the cooking programs, the Regeneration programs
can also be renamed and deleted.
From the program selected, through the functions
menu, access the SAVE function and rename or delete
to perform the desired procedure.
THE CORE PROBE AND COOKING IN
∆
T
Positioning the probe
The probe detects the temperature via a tip positioned
in proximity of the probe.
The tip of the probe must be inserted into the center
and thickest part of the product.
Cooking in
∆
T (Delta-T)
The
∆
T function is used mainly for slow, low
temperature cooking.
In
∆
T mode instead of setting the temperature in the
chamber, the temperature that the oven must maintain
as constant between the product core temperature and
the chamber must be set.
START
Manual
Regeneration parameters
8'
A
B
C
D
OPERATION
