COMBINATION OVEN OPERATION MANUAL
29
Using RackControl with Easy Service
During the use of EasyService, other plates can be
added in RackControl mode, which will be controlled
independently from those selected for EasyService.
Both functions can be used at the same time by first
activating EasyService and then adding other plates in
RackControl mode.
EasyService cannot be activated if RackControl is
already activated.
THE REGENERATION FUNCTION
The Regeneration function was developed to regenerate
(or take to service temperature) pre-cooked and blast
chilled/frozen products
34° F (1° C) to 39° F (4° C). This function is particularly
suitable for regenerating products already on the plate,
but can also be used for the regeneration of whole
products on trays.
Accessing the Regeneration function
Press the Regeneration pictogram on the HOME page.
The regeneration programs list will be displayed. Select
the desired program from the list or press MANUAL to
create a customized program.
Using the regeneration function
Select MANUAL program from the regeneration
programs list to set the oven to regenerate one or more
products.
The screen will display SOFT or CRISPY functions.
Select SOFT if a dish cooked at low temperature is being
regenerated. Select CRISPY if a high temperature dry
phase is to be performed to regenerate the product’s
surface crust at the end of regeneration. The functions
are optional and can both be disabled. They cannot
both be selected at the same time: they are opposite to
each other.
A-La-Carte
Lunch
O
I
STOP
1
2
3
4
5
6
7
8
9
10
250°
Salmon
Sautéed vegetables
Tomato au gratin
Milanese
OV
-3'
-2'
-3'
MANUAL
STEAMED
GRILLED
ROASTED
FRIED
BRAISED
AU GRATIN
BAKED
LOW TEMP.
SMOKED
EGGS
...
REGENERATED
Manual
Regeneration parameters
OPERATION
