COMBINATION OVEN OPERATION MANUAL
20
CREATING A COOKING PROGRAM
A cooking program can be made up from several
phases, which the oven performs in increasing order
(phase 1, phase 2, phase 3...) passing from one to
another automatically. In between phases, there will be
an audible sound to identify the phase change.
After having set the parameters relative to the initial
phase (phase 1), press the new phase button to create
the next phase.
Then, set the parameters of phase 2.
Additional phases can be created by repeating the
above steps.
At the end of programming, press the START BUTTON
to start cooking.
Press the DELETE Phase button to delete a
phase.
Setting a cooling phase between two phases
The temperature inside the oven chamber may have
to be cooled between one phase and another. For
example, when roasting the chamber must be cooled
between the browning phase (at high temperature) and
the cooking phase (at low temperature).
This operation can be performed automatically by
selecting an automatic cooling phase. The automatic
cooling phase can only be set from phase 2 onwards.
After having set a high temperature phase, create a new
phase and select automatic cooling from the cooking
modes button.
Once this mode has been selected, the oven will
propose default temperature, ventilation, and humidity
discharge valve values. Set the desired cooling
temperature min. 212° F (100° C).
In order to make cooling as fast as possible, do not
modify the ventilation and humidity discharge valve
values unless necessary.
START
New Phase
Delete Phase
START
1
250°
8’
2
100°
New Phase
Delete Phase
B
A
C
START
New Phase
Delete Phase
START
New Phase
Delete Phase
OPERATION
