Baker Hughes Druck Dry TC 165, Инструкция по эксплуатации, Страница: 39 / 58

Copyright 2013 Baker Hughes Company.
English–Dry TC / Liquid TC Temperature Calibrators | 31
See Table 5 for the heating and cooling capacity of the Dry TC and Liquid TC calibrators.
5.4.4.1 Heating and Cooling Gradient Parameter Level
The heating and cooling gradients and duration time can be set in parameter level
(regulation).
1. Press the
key for approximately 5 seconds. The main menu opens.
The last selected function appears on the upper display.
LED SET flashes on the lower display.
2. Press the or key until (operator) is displayed.
3. Press the key again. The group level opens.
Figure 37: Group Level SP (Set Point)
appears on the upper display.
Table 5: Calibrator Maximum Heating and Cooling Capacity
Model Heating Capacity Cooling Capacity
Dry TC 165
7 °C/min
(12.6 °F/min)
5 °C/min
(9 °F/min)
Dry TC 650
35 °C/min
(63 °F/min)
[650 °C to 300 °C]
(1202 °F to 572 °F)
10 °C/min
(18 °F/min)
[300 °C to 100 °C]
(572 °F to 212 °F)
5 °C/min
(9 °F/min)
Liquid TC 165
3 °C/min
a
(5.4 °F/min)
a. Silicone oil 10 cSt.
6 °C/min
a
(10.8 °F/min)
5 °C/min
b
(9 °F/min)
b. Distilled water.
4 °C/min
b
(7.2 °F/min)
Liquid TC 255
22 °C/min
c
(39.6 °F/min)
c. Silicone oil 50 cSt.
[200 °C to 50 °C]
(392 °F to 122 °F)
4 °C/min
c
(7.2 °F/min)
(50 °C to 30 °C)
(122 °F to 86 °F)
0.5 °C/min
c
(0.9 °F/min)
12 °C/min
b
(21.6 °F/min)
(90 °C to 50 °C)
(194 °F to 122 °F)
2 °C/min
b
(3.6 °F/min)
(50 °C to 30 °C)
(122 °F to 86 °F)
0.5 °C/min
b
(0.9 °F/min)