Baker Hughes Druck Dry TC 165, Инструкция по эксплуатации

Страница: 35 / 58

Copyright 2013 Baker Hughes Company.
English–Dry TC / Liquid TC Temperature Calibrators | 27
3. Press the key to confirm.
Figure 27: Manual Control (OPLO) Display
The current reference temperature appears on the upper display.
The letter and the current percentage of heating capacity appear on the lower display.
4. Press the key to increase the output capacity.
5. Press the key to decrease the output capacity.
Note: Press the and key to raise and lower the value by 0.1 respectively. If the keys are
held pressed for at least one second, the value increases or decreases quickly and after two
seconds even more quickly; this means the desired value can be reached rapidly.
5.4.2.2 Switching Off Manual Control
Manual control is switched on if the following display appears:
Figure 28: Manual Control (OPLO) Display
The current reference temperature appears on the upper display.
The letter and the current percentage of heating capacity appear on the lower display.
To switch off manual control:
1. Press the
key for approximately 5 seconds. The main menu opens.
Figure 29: Manual Control (OPLO) Menu
appears on the upper display.
LED SET flashes on the lower display.
2. Press the or key until the desired operating mode is displayed.
3. Press the key to confirm.