Baker Hughes Druck Dry TC 165, Инструкция по эксплуатации

Страница: 37 / 58

Copyright 2013 Baker Hughes Company.
English–Dry TC / Liquid TC Temperature Calibrators | 29
5. Press the key to open the respective set point memory.
Figure 33: Set Point 3 Entry
The selected set point memory, e.g. SP3, flashes on the upper display.
The corresponding current set point temperature appears on the lower display.
6. Press the key to increase the set point temperature.
7. Press the key to decrease the set point temperature.
Note: Press the and key to raise and lower the value by 0.1 respectively. If the keys
are held pressed for at least one second, the value increases or decreases quickly and after
two seconds even more quickly; this means the desired value can be reached rapidly.
8. Press the key to confirm the set point temperature.
The set point memory closes and the display returns to the parameter level.
9. Press and hold the or key to return to the calibration mode.
Note: If no key is pressed for approximately 15 seconds, the controller automatically returns to
the calibration mode.
5.4.3.2 Retrieving Saved Set Point Temperatures
The saved set point temperatures can be retrieved in calibration mode.
1. Press the
key when in calibration mode for approximately 2 seconds. The current set
point memory opens.
Figure 34: Set Point Retrieval (Showing Set Point Name)
Figure 35: Set Point Retrieval (Showing Set Point Temperature)
The current reference temperature appears on the upper display.