31
3A-1. INSTRUMENT CLUSTER
1&5. Turn signal indicator :
Turn signal indicators can be operated only when ignition is ‘ON’. They can be operated by using the turn
indicator switch on the combination switch. The direction indicator arrow (Left) and (Right) on the instrument
cluster flashes along with external indicators lights as per selection.
Both arrows will flash when hazard warning flasher is activated.
2. High beam indicator :
This indicator light comes on when the headlights are set to high beam and also when the headlight flasher
is operated.
3. Fuel level indicator:
Gasoline: This lamp warns the driver of low fuel in the fuel tank for immediate refilling. This warning lamp
will come on when there is approximately 1.7 liters of fuel remaining in the tank.
CNG/ LPG variants: LED will glow after ignition switch turned ON. It will start blinking as indication of need
for immediate refilling.
Caution:
Do not run the vehicle till the fuel tank runs dry . This will damage the fuel pump.
Note:
If the turn signal indicators do not blink, then there may be a problem in the electrical system. If the
indicators “Blink rapidly”, then it indicates that one of the indicator bulb has fused. Get it rectified
immediately.
1,5
2
3