Bailey infi 90 Modular Power System II, Инструкция

Страница: 13 / 54

INTRODUCTION
INSTRUCTION CONTENT
1 - 4 I-E96-427B
®
tors. Dipshunts allow either port of the termination unit to be
configured to operate as DTE or DCE devices. This feature
allows the termination unit to terminate a number of comput-
ers or terminals. One serial link connection on the termination
unit enables a multi-function controller module to communi-
cate to an NDCS03 Digital Control Station or IISAC01 Analog
Control Station.
INSTRUCTION CONTENT
This manual has five sections and six appendices.
Introduction Provides an overview of the termination unit.
Installation Explains the physical installation, wiring and cable require-
ments, dipshunt settings and handling of the termination unit.
Maintenance Contains a maintenance schedule.
Repair/Replacement
Procedure
Explains how to replace the fuse or the termination unit.
Support Services Explains how to order parts and other services available from
Bailey Controls Company.
Appendices Briefly discuss the modules that use the termination unit and
provide a cross-reference of dipswitch and jumper settings for
those modules.
HOW TO USE THIS MANUAL
Read this manual through in sequence. Read the installation
section thoroughly. Do the steps in order. Complete all steps in
the installation section before using the termination unit. Refer
to the Table of Contents or Index to find specific information
after the unit is operating.
GLOSSARY OF TERMS AND ABBREVIATIONS
Table 1-1 lists definitions of the terms and abbreviations used
in this instruction.
Table 1-1. Glossary of Terms and Abbreviations
Term Definition
DCE Data communication equipment or data circuit-termi-
nating equipment. Equipment that establishes and
terminates a communication link between two
devices. In RS-232-C communication systems,, the
DCE nomenclature indicates the signals that appear
at specified cable connection contacts. A modem is
an example of this type of device.
Dipshunt Dual in-line package with shorting straps.