INTRODUCTION
OVERVIEW
1 - 2
I-E96-427B
®
IISAC01 Analog Control Station through an NTCS04 Control I/
O Termination Unit. The IMMFC04 and IMMFC05 Multi-Func-
tion Controllers use the NTMF01 termination unit to terminate
a station link an7d connect to a redundant controller.
The INICT01 INFI-NET to Computer Interface Module is part of
the INICI01 INFI-NET to Computer Interface. The INPCT01
Plant Loop to Computer Interface Module is part of the INPCI02
Plant Loop to Computer Interface. Figure
shows an exam-
ple Plant Loop to computer interface application. The two mod-
ules use the TMF termination unit to terminate the connection
of a mainframe, computer, terminal or modem to the INFI-NET
or Plant Loop communication networks respectively. The
INPPT01 Plant Loop to Plant Loop Transfer Module is part of an
INPPR01 Plant Loop to Plant Loop Remote Interface. Figure
shows an example Plant Loop to Plant Loop interface module
application. Each PPT (one local, one remote) module connects
to the other through the NTMF01 termination unit.
Figure 1-2. Example Plant Loop to Computer Interface
Module Application
COMMUNICATION HIGHWAY (PLANT LOOP)
MODULE BUS
NICL01
INLIM03
INBTM01
INPCT01
NTMF01
COMPUTER
T00741A
