Baileigh TS-1044H, Руководство оператора

Страница: 21 / 68

18
18
ASSEMBLY
INSTALL TABLE EXTENSION WINGS
1. Attach the table extension wings to the main table
using 8 x 12mm hex head bolts (4 per wing), and
8 lock washers.
2. Align the table extensions with the table and
loosely attach the bolts.
3. Place a straightedge on the table and extension
to align the extension table and then tighten the
bolts.
Note: Be sure that the table extension wings are flush with front edge.
MOUNT FENCE STORAGE BRACKETS
The miter gauge and arbor wrench storage brackets are already
installed on the saw.
Install the fence storage brackets on the right side of the saw as
shown in using two Phillips head screws and flat washers.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.