Baileigh TS-1044H, Руководство оператора

Страница: 17 / 68

14
14
The moveable caster on this saw with (2) casters (2)
leveling screws front caster and front pedal that will
easier to move this saw and to place this saw as you
want.
Before performing machine leveling adjustment, shift the
foot pedal upward to allow the leveling screws to rest on
the floor. Turn the (2) leveling screws located at the
front bottom of the stand using a open wrench.
Reset Protector
Your saw comes equipped with a manual-reset thermal-
overload protector designed to open the power line
circuit when the motor temperature exceeds a safe
level, when motor is overloaded, or when a low voltage
condition exists.
Note: This motor should be blown out or
vacuumed frequently to prevent sawdust buildup which
can interfere with normal motor ventilation.
Once the motor is cooled to a safe operating
temperature, reset the thermal overload protector by
pushing the red button on the front of the junction box.
An audible click will indicate the thermal overload
protector is reset. Once the switch button is reset, the
saw may be started and operated as normal.
Note: If the reset button won't click into
place immediately, the motor is still too hot and must be
allowed to cool.
Frequent “blowing” of fuses or tripping of circuit
breakers may result if:

Motor is overloaded. Overloading can occur if a
workpiece is fed too rapidly or if the saw is
misaligned.

Motor circuit is fused differently from recommendations. Always follow instructions for the
proper fuse/breaker. Do not use a fuse/breaker of greater capacity without consulting a
qualified electrician.
Reset
Switch
Junction
Box
Leveling
Caster