Baileigh BS-128M, Руководство оператора

Страница: 35 / 52

32
32
Gearbox Oil
The drive gears run in an oil bath and will not require a lubricant change more often than once a
year. The exception to this is if the lubricant becomes accidentally contaminated or a leak
occurs because of improper replacement of the gear box cover. During the first few days of
operation, the worm gear drive will run hot. Unless the temperature exceeds 200° F, there is no
cause for alarm.
The following lubricants may be used for the gear box:
•
Atlantic Refinery Co. Mogul Cylinder Oil
•
Gulf Refinery Co Medium gear oil
•
Pure Oil Co. Park Clipper
•
Cities Service Optimus No. 6
Used oil products must be disposed of in a proper manner following your local regulations.
Storing Machine for Extended Period of Time
If the Band Saw is to be inactive for a long period of time, prepare the machine as follows:
1. Detach the plug from the electrical supply panel.
2. Clean and grease the machine.
3. Release tension on the blade or remove blade.
4. Cover the machine
Saw Blade Replacement
Wear gloves when handling the saw blade!
1. Raise the saw head to a vertical position and remove the blade
guard knob (W).
2. Carefully pull open the blade guard cover.
W