Baileigh BS-128M, Руководство оператора

Страница: 17 / 52

14
14
Lift Handle
Handle slides out easily and is used to maneuver the band saw around. When finished using, it
stores nicely back into the base casting.
Vise
Make sure saw bow is in a down or horizontal position before
moving or mitering to avoid tipping over machine.
Angle Indicator
Pulling up on the adjustable handle (L) disengages it
while the stud remains stationary. This allows you to
adjust the handle to the desired position. Releasing the
handle reengages it for tightening and loosening. Now
rotate the disk head assembly to the correct miter angle.
Check the angle on the indicator (M) and lock in the
angle.
CAUTION:
Make sure saw bow is in a down or horizontal position before
moving or mitering to avoid tipping over machine.
CAUTION:
Check that the saw blade clears all parts of the vise assembly
before cutting. The blade can strike parts of the assembly (especially during miter
cuts) if not properly adjusted.
L
M
L