Baileigh Industrial TS-1040E-1.0 30, Руководство оператора

Страница: 33 / 56

30
30
6. To set the fence perpendicular to the table, place a
square on the table and against the side of the
fence, loosen the top lock nuts (D) and adjust the
setscrews (E) until the fence is perpendicular.
Retighten lock nuts.
7. The pointer window (F) position can be adjusted if
needed. Loosen pan head screws (G), reposition the
pointer window and retighten pan head screws.
Aligning Table T-Slot Parallel with Blade
1. The table T-slot must be aligned parallel with the blade.
Using a combination square (A), measure the distance
from the back edge of the blade to the table T-slot.
2. Pivot blade forward 180º and measure the distance
using the exact same point on the blade. The difference
between both measurements must be equal to or less
t
han 1/64” (0.39mm).
3. If an adjustment is necessary, loosen the screws which
fix the table.
4.
Make the needed adjustment until both measurements are equal or less than 1/64”
(0.39mm) and retighten the screws.