Baileigh Industrial TS-1040E-1.0 30, Руководство оператора

Страница: 20 / 56

17
17
ASSEMBLY AND SET UP
1. Turn the tilting lead screw (A) to tilt the motor and
trunnion into the 90° position. This will allow for the
boxes packed into the cabinet to be removed.
2. Install the door by inserting the door pins into the
hinge sockets on the cabinet.
3. Install the handwheels onto the Blade Tilt and
Blade Height leadscrew shafts. Engage the slots
on the handwheels over the roll pin in the shafts.
4. Use the hand knobs to tighten the handwheels to
the shafts just enough so that it is difficult to turn
the handwheel to either raise the blade or tilt the
blade.
5. Loosen the hand knob 1/2 to 1 turn to allow the
handwheels to turn more freely during adjustment.
6. When tightening the hand knobs, Do Not over
tighten the knobs.
WARNING:
For your own safety, DO NOT connect the machine to the
power source until the machine is completely assembled and you read and
understand the entire instruction manual.
A
B