BADU Logic 2, Инструкция по установке и эксплуатации

Страница: 64 / 72

24
Special functions
7. Special functions
The menu “7. Special functions” is used to set
basic items and expand functions.
The menu is closed by pressing the “esc” key
or selecting “Exit special functions”.
Caution
Other than the time, all settings
may only be made by a special-
ist.
The suitable hydraulic variant for the specific application is selected and set here (see
“B.6. Hydraulic variants” on page 7). The associated diagram is displayed after
pressing “Info”.
Setting range: 1 - 4/Default: 1
7.1. Program selection
Caution
Normally the program selection is made only once during initial commis-
sioning by the specialist. Incorrect program selection can lead to unpre-
dictable errors.
Caution
This menu is used to set the current time and date.
7.2. Time and date
For analysis of the system data it is essential that the time is set accu -
rately on the controller. Please note that the clock has a 24 hour battery
reserve if the mains voltage is interrupted and must therefore be reset
afterwards.
Deviations in the temperature values displayed, for example due to cables which are
too long or sensors which are not positioned optimally, can be compensated for manu -
ally here. The settings can be made for each individual sensor in steps of 0.5 °C.
Offset S1 - S3 per setting range: -100 - +100 (translates to -50 °C - +50 °C)
Default: 0 °C
7.3. Sensor calibration
Caution
Settings are only necessary in special cases at the time of initial com -
missioning by the specialist. Incorrect Measurements can lead to unpre-
dictable errors.