BADU Logic 2, Инструкция по установке и эксплуатации

Страница: 61 / 72

21
Settings
5.10. Temperature dependent filtering
When this parameter is active, the “hourly filtering time” (see above) is reduced depending
on the average daily pool temperature.
At 30 °C the hourly filtering time set is carried out completely.
At 20 °C the hourly filtering time set is halved (and where necassery the solar run time
subtracted). The run times are calculated in 5 % steps per °C.
For example: 20 °C = 50 %, 25 °C = 75 %, 27 °C = 85 %, 30 °C = 100 %
Setting range: on, off/Default: off
5.11. Daily filtering time
This menu is used to set the minimum Min. daily filtering time. This ensures that the
filter unit runs each day for the time set here. Up to three filtering times can be set each
day and copied to another day. Eco mode: if the solar unit or the auxiliary heating runs
(the filter then also runs), these operating hours will be subtracted from the filtering
times set here.
5.12. Solar times
During the periods set here the solar system is enabled.
Setting range: off, daily 0:00 - 23:59/Default: daily 0:00 - 23:59
5.13. Heating times
During the periods set here the heating system is enabled.
Setting range: off, daily 0:00 - 23:59/Default: daily 0:00 - 23:59
5.9. Eco mode
When the eco mode is active the run time for solar and auxiliary heating operations
and the hourly minimum run time are subtracted from the daily filtering time set. Solar
operation times and rinse times (for the Easytronic) are subtracted from the hourly
filtering time or rather the hourly filtering time is ignored if the minimum hourly run time
is reached or exceeded. If the eco mode is deactivated, the hourly filtering time and
solar operating time are ignored when calculating the “Min. daily filtering time”. The
solar operating hours are also ignored when calculating the hourly filtering time.
Setting range: on, off/Default: on