BADU Logic 2, Инструкция по установке и эксплуатации

Страница: 55 / 72

15
Caution
The Measurements are explained with a
help text when the “Info” key is pressed.
Selecting “Overview” or “esc” exits the
info mode.
If “--” appears on the display instead of the measurement value, then
there may be a faulty or incorrect temperature sensor. If the cables are
too long or the sensors are not placed optimally, the result may be small
deviations in the Measurements. In this case the display values can be
compensated for by making entries on the controller. Follow the instruc -
tions under “7.3. Sensor calibration” on page 24.
Which Measurements are displayed depends on the selected program,
the connected sensors and the specific device design.
Measurements
1. Measurements
The menu “1. Measurements” serves to
display the currently measured tempera-
tures.
The menu is closed by pressing the “esc”
key or selecting “Exit Measurements”.