![background image](http://html1.mh-extra.com/html/baby-trend/eurosport/eurosport_owners-manual_3234776045.webp)
10.7 Cup Holder Attachment
A cup holder is provided and can be attached to either one of the
armrests. Use of cup holder is optional.
• Locate slot in the outer side of the armrest
pad and expose the cup holder attachment
track.
• Align the cup holder slot with the cup holder
attachment track and slide the cup holder
down over the attachment track.
• Grasp cup holder and slide up.
10.8 Smart Safety Buckle
The harness system on this Car Seat includes the “Smart Safety
Buckle” that sounds an audible “beep” when unbuckled to alert you if
the buckle becomes unbuckled during travel or use.
1. The Smart Safety Buckle will alert you if your child or anyone
unexpectedly unbuckles the harness system. When unbuckled,
the buckle beeps for 5 to 7 seconds to alert you that the buckle has
been unbuckled and then automatically turns off.
2. The Smart Safety Buckle will beep each time the harness is
unbuckled to remove your child. This reminds you that the system
is present and is still operating.
Please note that the battery for the Smart Buckle operation is enclosed
inside the buckle and the alarm cannot be turned off. The battery is not
replaceable and is not a serviceable part. The useful life of the battery is
longer than the useful life of the Back Support and Harness. At the end
of the useful life, please dispose of the buckle properly, consistent with
the guidelines for battery disposal. Should the alarm stop working,
contact Baby Trend for assistance and replacement part.
88
10.0
Operation and Adjustments
10.0
Operation and Adjustments
87
• Turn Plastic Anchor sideways and slide
through slot at the LATCH/Tether Bar
Storage on back of Seat Base.
NOTE: Pull up on vehicle Shoulder Belt
Positioner webbing to be sure
Plastic Anchor is secured under
plastic ring.
To remove vehicle Shoulder Belt Positioner:
• From back of car seat, pull vehicle
Shoulder Belt Positioner webbing
out to release tension on webbing.
• Turn plastic anchor sideways and
pull up through slot at LATCH/Tether
Storage Bar on back of Seat Base.
• From front of Car Seat, pull vehicle
Shoulder Belt Positioner out from between
Back Support and Seat Base.
Slot
LATCH/Tether
Storage Bar