manualshive.com logo in svg
background image

21

  •  Please review your vehicle owner’s manual to determine the 

      best location for each Car Seat use mode, any specific 

      instructions for Car Seat installation, or to determine if any 

      locations are unsafe for Car Seat installation. If you do not have 

      the vehicle owner’s manual or the owner’s manual does not 

      address child car seat installation, please contact the vehicle 

      manufacturer to obtain this information before using the Car Seat.
 

•  Use a rear seat location whenever possible. Rear seating 

 

  locations have been shown to be statistically safer for children 

 

  than a front seating location.

 

•  Only use a vehicle front seating location if specifically allowed

 

  in vehicle owner’s manual and following all instructions in the

 

  vehicle owner’s manual.

 

•  Baby Trend recommends that you use 

 

  the vehicle center rear seat location 

 

  when possible as this is the safest 

 

  location for the Car Seat. 

 

•  Use a vehicle seating location that 

 

  has a tether anchor whenever possible.

 

   Installation with Top Tether is Recommended.

    

a. Baby Trend requires using the Top Tether provided 

 

   

  with this car seat whenever possible.  

 

   

  Installation of a car seat using the Top Tether can 

 

   

  make getting a secure installation easier and can    

 

   

  reduce the risk of injury in a crash. 

 

   

b. The car seat may be installed without the Top Tether 

 

   

  when a vehicle tether anchor is not available.

6.0

 Selecting a Vehicle Seating Location

LATCH

   

Lower Anchors and Tethers for Children (LATCH) System is 

   

designed to make installation of child car seats easier by 

   

requiring child restraints to be installed without using the 

vehicle’s seat belt system. Since September 1, 2002, at least two rear 

seating positions of all cars, mini vans and light trucks come equipped 

with lower child restraint anchor points located between a vehicle’s 

seat cushion and seat back. These vehicles are also equipped with at 

least 3 top tether anchorages located behind the vehicle seat. Together, 

the lower anchors and top tether make up the LATCH system. All child 

restraints manufactured since September 1, 2002 have lower anchor 

and top tether attachments which will connect to the vehicle’s LATCH 

System. Read your vehicle owner’s manual for exact locations, 

identification and requirements for use with a child restraint.
ONLY
 use LATCH to secure your child

restraint in a seating position recommended 

by the vehicle manufacturer for LATCH

installation. Refer to the vehicle owner’s 

manual for the vehicle’s top tether anchor 

locations. Vehicle anchorages should be

identified by one of the following symbols.
The EuroSport Toddler Car Seat (

WITH

Harness) can be used with the LATCH

system to the maximum weight for

harness use - 50 lbs. * (23 kg).
The EuroSport Booster Car Seat 

(

WITHOUT 

Harness) may be secured 

with the LATCH in the Booster use 

mode to 100 lbs. (45 kg).
* IMPORTANT: Some vehicle manufacturers 

  have lower weight rating for LATCH anchors 

  when used with Toddler Car Seat. Consult your  vehicle owner’s 

  manual or contact the vehicle manufacturer for limits on your vehicle’s 

  LATCH anchors.

22

6.0

 Selecting a Vehicle Seating Location

LATCH Anchor

Vehicle Top 

Tether Anchor 

Points

Содержание EuroSport

















































Отзывы: