![background image](http://html1.mh-extra.com/html/baby-trend/eurosport/eurosport_owners-manual_3234776041.webp)
10.0
Operation and Adjustments
79
The harness can be adjusted to three different heights. The proper
height of the harness straps is at or just above your child’s shoulders. If
your child’s shoulders are between two levels, always use the higher of
the two. Remove the body insert if your child’s shoulders are above the
highest set of harness slots.
Follow the instructions very closely to ensure that the harness is
properly adjusted to fit your child at all times. Check the fit of the
harness every time you use the Car Seat.
To remove Harness Strap:
To adjust the height of the Harness Straps,
remove Harness Straps from Back Support,
a. Adjust the harness to loosen Harness Straps.
b. From the front of Back Support, slide top
corners of Back Support pad off Back
Support exposing harness slots in Back
Support.
c. From back of car seat, pull the metal
harness retainer on the Harness Straps
away from the back of the Back Support.
d. Rotate the metal harness retainer and
harness strap to position the narrow side
of the metal harness retainer into the
harness slot.
e. Push the metal harness retainer through
the harness slot opening in the Back
Support and seat pad.
f. Pull the harness strap and metal harness
retainer out through the front of the seat pad.
10.0
Operation and Adjustments
80
To re-attach Harness Strap:
Re-attach the Harness Straps at the required
height by securing the Harness Straps into the
harness straps slots in the Back Support,
a. Rotate the metal harness retainer and
Harness Strap to position the narrow side
of the metal harness retainer into the
harness slot in the pad.
b.
Slide the metal harness retainer through
the harness slot opening in the seat pad.
c. Slide the metal harness retainer into the
harness slot opening in the Back Support.
d.
Pull the metal harness retainer through the
seat support, position the metal harness
retainer flat against the back surface of the
Back Support and pull on the harness to
remove all slack.
e. Check that the metal harness retainer is
flat against the surface of the Car Seat
Repeat above steps for second Harness
Strap. Be sure both metal harness retainer
are properly positioned flat against the
Back Support and the Harness Straps
are not twisted.
f. Slide back support pad over top corners
of Back Support.