Baby Lock Kinetic Frame, Руководство по сборке

Страница: 21 / 28

Baby Lock Kinetic Frame Assembly Instructions 21
Step 10
Pole Coupler Assembly
Fig. 10-1
Fig. 9-1
Fig. 9-2
Fig. 8-1
Fig. 9-4
Fig. 9-3
Pole Coupler
Pole Section
Parts needed
(10) pole sections
(5) pole couplers
10-1: Join two pole sections together by
inserting a pole coupler into the end of one
pole section (as shown in Fig. 10-1),
depressing the spring button as it slides in.
Continue sliding until the spring button pops
out of the hole in the pole section. Repeat
to add the second pole section to the first to
complete one pole assembly.
10-2: Using the remaining pole couplers and
pole sections, repeat Step 10-1 to complete
three more pole assemblies.
Special tool for pole end attachment
Note:
A pole end wrench is provided to
aid in holding the pole ends without ratchets
and a regular M10 nut is provided for the pole
ends with ratchet wheel assemblies, if you have
trouble holding the pole end while tightening
the pole end into the pole.
Place the smalll holes on the wrench over
two of the protruding tabs on the pole ends
to help hold the pole ends while tightening
the lock nut.
Fig. 10-2