Baby Lock Kinetic Frame, Руководство по сборке

Страница: 17 / 28

Baby Lock Kinetic Frame Assembly Instructions 17
Step 7
Track Assembly (continued)
Fig. 7-5
7-9:
Place the machine onto the carriage and
again, roll it the entire length of the frame,
working the tracks into the wheels as you go.
Lightly tighten the front track support screws as
you move down the table. Check the carriage
to verify that it rolls smoothly and that both
ends of the carriage are engaging the tracks.
If you find a section of track where the carriage
rocks back and forth when the machine is
moved all the way forward or back, loosen the
front track support screws, adjust the front
track until the carriage rolls smoothly and does
not rock, then re-tighten the front track screws.
7-10:
Finally, fully tighten the front track
screws to the table.
Detail 7-5