Baby Lock Kinetic Frame, Руководство по сборке

Страница: 14 / 28

14 Baby Lock Kinetic Frame Assembly Instructions
Parts needed
(1) frame assembly
(2) support rail
(8) M8x25mm socketed button head cap screw
QF09318-06 (already in frame ends)
Tools Required
5mm Allen wrench (provided)
6-1: Remove the four (4) lightly-tightened
M8x25mm QF09318-06 end screws from the
frame, as shown in Fig. 6-2.
6-2: Align the support rail to the end of the
frame, orienting the rail as shown in Fig. 6-1.
Insert the four (4) M8x25mm QF09318-06
through the support rail and into the frame and
fully tighten with the 5mm Allen wrench.
(Fig. 6-1)
6-3: At this time, fully tighten the remaining
four (4) screws at the upper corner legs into the
frame. (Fig. 6-2)
6-4: Repeat steps 6-1 through 6-3 to attach
the remaining support rail to the other end of
the frame.
Step 6
Support Rail Assembly
Fig. 6-1
Note the orientation
of the support rail to
the end leg.
Fig. 6-2
Remove these lightly-
tightened end M8x25mm
QF09318-06 to prepare
for placing the support
rail (Step 6-1).
Tighten these M8x16mm
QF09318-07 at each corner in Step 6-3.