B9Creations B9 Core Series, Руководство пользователя

Страница: 33 / 35

B9Creations Core Series Printer User Manual Rev. A-3 04-14-2020
Improper material selected Confirm material selected in
the
B9Creations Core Series is
the same as the material in the
DuraVat used for printing.
Model not sufficiently
supported or improperly
positioned Adjust supports and modify
print position of model.
Material is old Replace material in DuraVat.
Clean DuraVat. Refill DuraVat
with proper material. Reprint
model.
Re-boot required Turn rear On/Off button “Off.”
Wait 15 seconds. Turn rear
On/Off button “On.” Re-load
model and re-print
If none of the above solves the
problem, contact the
B9Creations, LLC support
6 Printer Operates, but
Indication prints
poorly
Print model not created
properly Check model in B9Create ,
insure model is “snapped to
floor or foundation”
Error with Print model file Load and print “Sample Print”
model. If test model prints
accurately, .stl model is not
correct. Remake .stl file and
reprint.
Improper material selected Confirm material selected in
the
B9Creations Core Series is
the same as the material in the
DuraVat used for printing.
Model not sufficiently
supported or improperly
positioned Adjust supports and modify
print position of model.
Material is old Replace material in DuraVat.
Clean DuraVat. Refill DuraVat
with proper material. Reprint
model.
Re-boot required Turn rear On/Off button “Off.”
Wait 15 seconds. Turn rear
On/Off button “On.” Re-load
model and re-print
If none of the above solves the
problem, contact the
B9Creations, LLC support
7 Printer does not
connect to computer
Printer and computer not on
same network Confirm printer and computer
are on the same network