B9Creations B9 Core Series, Руководство пользователя

Страница: 14 / 35

B9Creations Core Series Printer User Manual Rev. A-3 04-14-2020
NOTE
If additional hardware is installed, it could cause malfunctions to the system. Do not install any other
additional hardware if not authorized by B9Creations, LLC .
6.3 Software Setup

B9Creations Core Series printer does not require any software to be installed by the operator. The
software is already installed and configured.

B9Creations Core Series B9Create software must be loaded on a laptop or desktop computer to
create print files. Software updates and instructions can be accessed at www.B9C.com .
NOTE
Do not install additional software if not authorized by B9Creations, LLC.
7 Operation
7.1 Turning the Printer “ON”
Turn “ on” the rear mains On/Off switch. The Function Button on the
front of the printer will illuminate and fade to “off” multiple times
while the system boots up. Initial startup may take several minutes.
For Button Illumination codes, see Section
7.5
7.2 Waking the Printer from Stand-By Mode
Press the Function Button to bring the printer out of Stand-By Mode.
When in Stand-By Mode, the LED ring on the Function Button ebbs on
for 1-1/2 second, ebbs off for ½ second and repeats. For Button
Illumination codes, see Section
7.5 .
7.3 Turning Printer “OFF”
Turn “ off” the rear mains On/Off switch.
7.4 Preparing the Printer for Extended Shut Down
If the printer is not to be operated for an extended length of time (> 8 hours):
“Function Button”