12
MENU STRUCTURE / NAVIGATION
n
b
has been pressed while the pump is
infusing. Start manual bolus at
1200 ml/h by pressing
k
(see top of
display) or proceed to set bolus limit
with
l
(see bottom of display).
All status information is available in the
bottom line of the display. The desired
information can be selected by using
d
u
and will be displayed permanently
thereafter (e. g. drug long name, etc.).
Display
Meaning
Set pressure level with
l
or
r
and
confirm by pressing
k
.
Cancel to edit pressure by using
c
.
Pre-alarms are indicated by a message on
the display (e.g. “VTBI near end”), an
audible tone and a flashing yellow LED.
To confirm a pre-alarm press
k
.
In case of an operating alarm (e.g. "VTBI
infused") the infusion stops, an audible
tone sounds and the red LED flashes.
Confirm alarm by using
k
.
Confirming does not activate an acoustic
feedback.
This hint pops up if a user tries to edit or
change a parameter by pressing
l
when
that parameter is unable to be changed.
Press and hold
o
for 3 sec to turn pump
off. A white bar stretches from left to
right and counts down the 3 sec.
As long there is an infusion line inserted
the pump will not turn off but will use
standby.
