B & G H3000 Pilot, Руководство пользователя

Страница: 95 / 128

___________________________________________________H3000 Pilot Handbook
HB-3001-02 95
Diagnostic data
The Pilot computer is continually monitoring the Pilot and H3000 System
for correct operation. If a fault is detected the Pilot Display will show an
error message. If installed the system audible alarm will sound.
To remove the alarm window globally from all GFDs select down, then
SILENCE and press ‘
↵
’ if you wish to remove this warning from the
display you are using only highlight IGNORE and press
↵
Pilot Display Fault Indication
Code Description on GPD/GFD
100 Pilot not Commissioned
101 Pilot Compass Failure
102 Rudder Sensor Out of Range
103 Rudder Drive not Responding
104 No (or Low) Boat Speed
105 System Compass Failure
106 No NMEA Data
107 <NOT USED>
108 Poor Quality NMEA Data
109 No (or Low) Wind Speed
110 No Optimum Wind Data
111 Current Trip: Drive or Clutch
112 Network Communication Error
113 Memory Card Changed - Reset End Stops
114 Memory Card Error
115 Drive Power Failure - Check Supply
NO
PILOT
Network Communication Error - cannot detect Pilot
Computer
Error Messages