B.A. International BA OPTIMA E+ BAE380R Скачать руководство пользователя страница 6

Страница: 6 / 26

The meter numbers 1.0, 2.0, 3.0 and digital numbers 00-16 do not

represent the actual length from the apical foramen. It simply indicates

the file progression towards the apex. The digital numbers -1 and -2

indicate that the file has passed the apex foramen. The digital number “00”

indicate that the file has reached the apex foramen. Subtract 0.5-1mm

from the measured file length as the working length. These numbers are

used to estimate the canal’s working length.

2.3 Instructions for contra angle

2.3.1 The contra angle adopts precision gear transmission, and the

transmission ratio is 6:1.

2.3.2 Before the first use and after treatments, please clean and

disinfect contra angle with disinfectant of neutral PH value. After

disinfection, lubricate it with specific cleaning oil. Finally, sterilize

it under high temperature and high pressure (134℃, 2.0bar~2.3bar

(0.20MPa~0.23MPa)).

2.3.3 The contra angle can only be used together with this device.

Otherwise the contra angle will be damaged.

2.4 Installation and removal of contra angle.

2.4.1 Installation

Align any locating pin of the contra-angle with the positioning slot

on the motor handpiece and push the contra-angle horizontally. The three

locating pins on the contra-angle are inserted into the three positioning

holes on the motor handpiece. A “click” sound indicates that the

installation is in place. The contra-angle can be rotated 360° freely.

The contra-angle is free to rotate, adapting to the root canal of

different positions, and it is convenient to watch the screen when

operating.

2.4.2 Removal

Pull out the contra angle horizontally when the motor handpiece has

stopped running.

Warnings:

a) Before inserting or pulling out the contra angle, please first stop

the motor handpiece.

b) After installation, please check and confirm that the contra angle

has been properly installed.

2.5 Installation and removal of file

2.5.1 Installation of file

Before starting the device, insert the file into the hole of contra angle

head.

Hold down the push button on the contra angle and insert the file.

positioning slot

locating pin

Содержание BA OPTIMA E+ BAE380R



























Результаты поиска

Содержание BA OPTIMA E+ BAE380R

Отзывы:

Бренды по названию

Популярные бренды

B.A. International BA OPTIMA E+ BAE380R, Инструкция по эксплуатации

Результаты поиска

Содержание BA OPTIMA E+ BAE380R

Отзывы:

Бренды по названию

Популярные бренды